Multifunction, Turn Signal Switch

Multifunction, Turn Signal Switch Replacement

Removal Procedure





Caution: Refer to Restraint Systems in Service Precautions.

1. Disable the Restraints system. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.
2. Remove the upper and lower trim covers.
3. Disconnect the electrical connectors.
4. Release the multifunction switch clips from the stalk switch mount, remove the multifunction switch.

Installation Procedure





1. Install the multifunction switch to the stalk switch mount.
2. Connect the electrical connectors.
3. Install the upper and lower trim covers.
4. Enable the Restraints system. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.