Suspension - Revised Rear Shock Absorber Replacement
Bulletin No.: 05-03-09-011Date: November 30, 2005
SERVICE MANUAL UPDATE
Subject:
Revised Rear Shock Absorber Replacement
Models:
2005 Pontiac G6
This bulletin is being issued to revise Step 2 of the Rear Shock Absorber Replacement installation procedure in the Rear Suspension sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Step 2 has been revised as follows:
2. Install the shock absorber to body nuts.
Tighten
Tighten the nuts to 25 N.m (18 lb ft).
Disclaimer