Recall - Owners Manual Update/Child Seat Anchors: Overview
Customer Satisfaction - Rear Seat Child Restraint Anchorage Owner Manual Update# 05036 - (Mar 30, 2005)
Models:
2005 Pontiac G6
THIS PROGRAM IS IN EFFECT UNTIL MARCH 31, 2006
Condition
Certain 2005 model year Pontiac G6 vehicles have anchorages in the rear centre seating position that are not described in the owner manual.
Correction
An owner manual update will be sent to owners of records that describes the location and proper use of the anchorages in all three rear seating positions. Dealers are to place an update in the owner manual of vehicles in their inventory.
Vehicles Involved
Involved are 2005 model year Pontiac G6 vehicles built within the VIN breakpoints shown.
Important:
Dealers should confirm vehicle eligibility through GMVIS (GM Vehicle Inquiry System) prior to beginning recall repairs. [Not all vehicles within the above breakpoints may be involved.]
For dealers with involved vehicles, a Campaign Initiation Detail Report containing the complete Vehicle Identification Number, customer name and address data has been prepared and is being furnished to involved dealers. Dealers that have no involved vehicles currently assigned, will not receive a Campaign Initiation Report.
The Campaign Initiation Detail Report may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete this recall is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this report to the follow-up necessary to complete this recall.
Parts Information
No parts are required for this recall.
Service Procedure
Make a copy of the owner manual update in this bulletin and place it in the owner manual.
Claim Information
Submit a Product Recall Claim with the information shown.
Customer Notification
General Motors will notify customers of this recall on their vehicle (see copy of customer letter shown in this bulletin).
All unsold new vehicles in dealers' possession and subject to this recall MUST be held and inspected/repaired per the service procedure of this recall bulletin BEFORE customers take possession of these vehicles.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. This could be done by mailing to such customers a copy of the customer letter shown in this bulletin. Recall follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this recall enters your vehicle inventory, or is in your dealership for service in the future, please take the steps necessary to be sure the recall correction has been made before selling or releasing the vehicle.
This information replaces the information found in your owner manual under the headings Where to Put the Restraint, Top Strap Anchor Location, Lower Anchorages and Top Tethers for Children (LATCH System), and Securing a Child Restraint Designed for the LATCH System.
Where to Put the Restraint
Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. General Motors recommends that child restraints be secured in a rear seat, including an infant riding in a rear-facing infant seat, a child riding in a forward-facing child seat and an older child riding in a booster seat.
Your vehicle has a rear seat that will accommodate a rear-facing child restraint. A label on your sun visor says, "Never put a rear-facing child seat in the front." This is because the risk to the rear-facing child is so great, if the airbag deploys.
Dealer Recall Responsibility
Caution:
A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger's airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. Even though the passenger sensing system is designed to turn off the passenger's frontal airbag if the system detects a rear-facing child restraint, no system is fail-safe, and no one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. General Motors recommends that rear-facing child restraints be secured in the rear seat, even if the airbag is off. If you need to secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat.
If you need to secure more than one child restraint in the rear seat, review the illustrations shown. Depending on where you place the child restraint, you may not be able to access certain safety belt assemblies or LATCH anchors for additional passengers or child restraints.
Wherever you install a child restraint, be sure to secure the child restraint properly.
Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle -- even when no child is in it.
Top Strap Anchor Location
Your vehicle has top strap anchors for the rear seating positions. The anchors are located on the filler panel behind the rear seat head restraints.
If your vehicle has adjustable head restraints, pull up the head restraint to access the anchors. The straps from the child restraint must be threaded between the poles of the head restraint on the seat. The strap must not go around the head restraint.
Do not secure a child restraint in the right front passenger's position if a national or local law requires that the top strap be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. There is no place to anchor the top strap in this position.
Lower Anchorages and Top Tethers for Children (LATCH System)
Your vehicle has the LATCH system. There are anchors for all three rear seating positions. The anchors are located between the seatback and the seat cushion. There is a specific way to attach a child restraint to the anchors in the three possible positions.
If you need to secure more than one child restraint in the rear seat see Where to Put the Restraint. Depending on where you place the child restraint, you may not be able to access certain safety belt assemblies or LATCH anchors for additional passengers or child restraints.
You cannot secure three child restraints using the LATCH anchors in the rear seat at the same time, but you can install two of them. If you want to do this, install one LATCH child restraint in the passenger-side position, and install the other one either in the driver's-side position or in the centre position. Refer to the illustration to learn which anchors to use.
This system, designed to make installation of child restraints easier, does not use the vehicle's safety belts. Instead, it uses vehicle anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top strap.
In order to use the LATCH system in your vehicle you need a child restraint designed for that system.
To assist you in locating the lower anchors for this child restraint system, each seating position with the LATCH system has a label on the seatback at each lower anchor position.
The labels are located near the base of all three rear seating positions.
Caution:
If a LATCH-type child restraint is not attached to its anchorage points, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual.
Securing a Child Restraint Designed for the LATCH System
1. Find the LATCH anchorages for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. See Lower Anchorages and Top Tethers for Children (LATCH System).
2. Put the child restraint on the seat.
3. Your child seat may be equipped with either rigid or flexible attachments. Flexible attachments are usually attached to material similar to seat belt webbing. Rigid attachments are built into the base of the child restraint. If your child restraint has flexible attachments, attach and tighten the LATCH attachments on the child restraint to the LATCH anchorages in the vehicle. The child restraint instructions will show you how. If your child restraint has rigid attachments, attach them to the LATCH anchors in the vehicle per the manufacturer's instructions. In the centre position, you may attach one anchor and then rotate the child restraint to attach the second anchor. If this is too difficult, you may install the child restraint at either of the rear outboard positions or use the vehicle's safety belts to attach the child restraint in the rear centre position. See the following section for Securing a Child Restraint in a Rear Seat Position in your owner manual.
4. If the child restraint is forward-facing, attach and tighten the top strap, if equipped, to the top strap anchor. Refer to the child restraint instructions and the following steps:
A. Find the top strap anchor.
B. Route and tighten the top strap according to your child restraint instructions and the following instructions:
C. If the position you are using has a head restraint and you are using a single tether, route the tether under the head restraint and in between the head restraint posts.
D. If the position you are using has a head restraint and you are using a dual tether, route the tether under the head restraint and in between the head restraint posts.
E. You may have to raise the head restraint to route and tighten the top strap. Be sure to lower the head restraint once the child restraint is secure.
5. Push and pull the child restraint in different directions to be sure it is secure.
To remove the child restraint, simply unhook the top strap from the top strap anchorage and then disconnect the LATCH attachments from the LATCH anchorages.
Disclaimer