Scan Tool Data Definitions
Scan Tool Data Definitions
Body Control Module (BCM)
Battery Voltage Signal
Display indicates battery voltage. Measured in volts.
Shift Lock Solenoid Command
Displays the status of the shift lock control solenoid. Lock indicates the control circuit is grounded. Unlock indicates that the control circuit is not grounded.
Powertrain Control Module (PCM)
Initial Brake Apply Signal
Displays Applied or Released status of the brake switch.
TCC Brake Switch
Displays Open or Closed status of the TCC Brake switch.
TR Sw. A/B/C/P
Displays LOW or HI for the state of each of the four inputs from the IMS. LOW displayed indicates a low voltage signal (0 volts) being monitored at the PCM. HI displayed indicates a high voltage signal (B+) being monitored at the PCM.