B0017
DTC B0017
DTC DESCRIPTOR
This diagnostic procedure supports the following DTC:
DTC B0017 Starter Request Circuit Performance
CONDITIONS FOR SETTING THE DTC
Not Okay To Start Received From ECM-The DTC sets when the body control module (BCM) is in passive arm mode and attempting to start without a valid slip ring message.
TEST DESCRIPTION
Steps 1-4:
The numbers below refer to the step numbers on the diagnostic table.
3. This step tests whether the condition is the module, the system, or a related condition.
4. This step tests if the condition has been corrected or identified as specified in the supporting text.