Radio Housing Bracket Replacement (Lower)

RADIO HOUSING BRACKET REPLACEMENT (LOWER)

REMOVAL PROCEDURE
1. Remove the instrument panel pad.




2. Remove the bolt (11) attaching the driver side inner brace assembly (3) to the lower radio bracket (4).
3. Remove the bolt (1) attaching the HVAC unit (2) to the bracket (4).
4. Remove the bolt (6) attaching the instrument panel right end bracket (5) to the lower radio bracket (4).
5. Remove the screw (7) attaching the instrument panel right end bracket (5) to the lower radio bracket (4).
6. Remove the screws (8), attaching the lower radio bracket (4) to the vehicle.
7. Remove the electrical connector from the lower radio housing bracket.
8. Remove the lower radio bracket (4) from the vehicle.

INSTALLATION PROCEDURE




1. Install the lower radio bracket (4) to the vehicle.
2. Install the electrical connector to the lower radio housing bracket.
3. Install the screws (8) attaching the lower radio bracket (4) to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Install the screw (7) attaching the instrument panel right end bracket (5) to the radio bracket (4).

Tighten the screw to 2 N.m (18 lb in).

5. Install the bolt (6) attaching the instrument panel right end bracket (5) to the lower radio bracket (4).

Tighten the bolt to 9 N.m (80 lb in).

6. Install the bolt (1) attaching the HVAC unit (2) to the lower radio bracket (4).

Tighten the bolt to 9 N.m (80 lb in).

7. Install the bolt (11) attaching the driver side inner brace assembly (3) to the lower radio bracket (4).

Tighten the bolt to 9 N.m (80 lb in).

8. Install the instrument panel pad.