Console Trim Panel Replacement - Right

Console Trim Panel Replacement - Right

Removal Procedure





1. Open the instrument panel compartment door.
2. Remove the 2 screws (3) attaching the right console trim panel (2) to the instrument panel.
3. Pull the rear of the right console trim panel (2) downward to disengage it from the floor console retaining clip (1).
4. Remove the right console trim panel (2) from the floor console.



Installation Procedure





1. Install the right console trim panel (2) to the floor console making sure the floor console retaining clip (1) is engaged.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 2 screws (3) attaching the right console trim panel (2) to the instrument panel.

Tighten the 2 screws (3) to 2 N.m (18 lb in).

3. Close the instrument panel compartment door.