Seat Back Replacement - Front

SEAT BACK REPLACEMENT - FRONT

REMOVAL PROCEDURE
1. Remove the front seat outer trim panel.
2. Remove the front seat.
3. Remove the seat back hinge cover.




4. Remove 2 seat cushion frame-to-seat back frame mounting bolts (1) from each side of the seat cushion.
5. Remove the seat back.

INSTALLATION PROCEDURE
1. Position the seat back to the seat cushion.




2. Install 2 seat cushion frame-to-seat back frame mounting bolts (1) on each side of the seat cushion.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the seat cushion frame-to-seat back frame mounting bolts to 37.5 N.m (28 lb ft).

3. Install seat back hinge cover.
4. Install the front seat.
5. Install the front seat outer trim panel.