11. Intake Manifold Removal

Intake Manifold Removal





1. Important: The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.

Remove the manifold absolute pressure (MAP) sensor (714).
2. Remove the grommet (715) from the sensor as required.





3. Remove the evaporative emission (EVAP) clip (740), bolt (742), bracket (741), valve (730), and tubes (729, 735).
4. Remove the positive crankcase ventilation (PCV) hose - dirty air from the manifold.





5. Remove the intake manifold bolts (512) and fuel rail stop bracket (712).
6. Remove the intake manifold (500).





7. Remove the intake manifold gaskets (514).
8. Discard the intake manifold gaskets.