54. Valve Rocker Arm Cover Clean and Inspect
Valve Rocker Arm Cover Cleaning and Inspection
1. Important:
^ Do not use the valve rocker arm cover gasket again. Install a NEW gasket during assembly.
^ Remove the ignition coils before cleaning the cover in solvent. Do not submerge the ignition coils in solvent.
^ Do not remove the oil fill tube from the covers unless service is required.
Inspect the oil fill tube for a loose fit or damage.
2. Inspect the covers for the following conditions:
^ Scoring or damage to the gasket surfaces
^ Ventilation system passages for restrictions
^ Threaded bolt holes for damage or debris