Timing Components: Specifications

Timing Chain Dampener Bolt/Screw 25 Nm (18 ft. lbs.)

Front Cover Bolt/Screw 25 Nm (18 ft. lbs.)

Crankshaft Balancer Bolt/Screw - Installation Pass to Ensure the Balancer is Completely Installed 330 Nm (240 ft. lbs.)
Crankshaft Balancer Bolt/Screw - First Pass - Install a NEW Bolt/Screw After the Installation Pass and Tighten as Described in the First and Final Passes 50 Nm (37 ft. lbs.)
Crankshaft Balancer Bolt/Screw - Final Pass 140 degrees