Instrument Panel Cluster (IPC) Replacement

INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument cluster trim panel.
2. Remove the 4 screws (1) attaching the instrument cluster (2) to the instrument panel.
3. Pull the top of the cluster from its cavity.
4. Using a flat-bladed tool, open the wiring connector locking tab (3) on the back of the cluster (2).
5. Remove the instrument cluster (2) from the vehicle.

INSTALLATION PROCEDURE




1. Connect the wiring connector and locking tab (3) to the back of the cluster (2).
2. Install the cluster (2) to the instrument panel.
3. Install the 4 screws (1) attaching the instrument cluster (2) to the instrument panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Install the instrument cluster trim panel.