Trunk Lamp: Service and Repair

REAR COMPARTMENT LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Open the rear compartment.
2. Use a small flat-bladed tool to release the retaining tabs. Remove the rear compartment lamp (1).
3. Disconnect the wiring harness connector (2) from the assembly.
4. Remove the bulb (3) from the rear compartment lamp (1), if necessary.

INSTALLATION PROCEDURE




1. Install the bulb (3) to the rear compartment lamp (1), if removed.
2. Connect the wiring harness connector (2).
3. Install the rear compartment lamp (1), pressing into the lamp place until fully seated.
4. Close the rear compartment.