Fuel Hose/Pipes Replacement - Chassis

FUEL HOSE/PIPES REPLACEMENT - CHASSIS

REMOVAL PROCEDURE
1. Disconnect the fuel and evaporative emission (EVAP) lines at the engine compartment.
2. Disconnect the fuel and EVAP lines at the fuel tank.




3. Remove the bolts (2) and the nuts (1) securing the stone guard.




4. Remove all the fuel line bracket pop rivets securing the fuel and EVAP pipes to the under body.
5. Remove the fuel and EVAP lines from the vehicle.

INSTALLATION PROCEDURE
1. Install the fuel and EVAP lines to the vehicle.




2. Install the fuel line bracket pop rivets.




3. Install the bolts (2) and the nuts (1) to the stone guard.
4. Install the fuel and EVAP lines at the fuel tank.
5. Install the fuel and EVAP lines at the engine compartment.
6. Inspect for leaks.
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 2 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.