Traction Control Switch Replacement (Automatic Transmission)

Traction Control Switch Replacement (Automatic Transmission)
Removal Procedure





1. Remove the shifter control knob retaining screw (1).
2. Remove the center console.





3. Carefully lift the lower housing assembly (1) from the base, disengaging the 3 locating tabs.
4. Disconnect the traction control switch connector (2).
5. Remove the selector lamp holder (3) from the lower housing (1).
6. Remove the lower housing, upper cover, gearshift lever, knob and boot as an assembly from the shift lever.





7. Separate the lower housing (2) from the upper cover (3) by releasing the 4 locking tabs (1).





8. Remove the traction control switch (1) from the lower housing.

Installation Procedure





1. Install the traction control switch (1) to the lower housing.





2. Install the lower housing (2) to the upper cover (3).
3. Install the lower housing, upper cover, gearshift lever, knob and boot as an assembly to the shift lever.





4. Install the selector lamp holder (3) to the lower housing (1).
5. Connect the traction control switch connector (2).
6. Engage the 3 locating tabs of lower housing assembly to the base.
7. Install the center console.





8. Install the shifter control knob retaining screw (1).