Wheel Speed Sensor Jumper Harness Replacement - Front (Left)

Wheel Speed Sensor Jumper Harness Replacement - Front (Left)

Removal Procedure
1. Raise and support the vehicle.





2. Remove the wheel speed sensor jumper electrical connector (3) from retaining clip (4).
3. Disconnect the wheel speed sensor jumper electrical connector (3).





4. Pull the grommet and wheel speed jumper harness through the inner fender pass-through.
5. Remove the wheel speed sensor jumper (2) from the front strut mounting (3), noting the routing of the wheel speed sensor jumper.





6. Disconnect the wheel speed sensor jumper connector (1) from the wheel speed sensor (2).
7. Remove the wheel speed sensor jumper harness.

Installation Procedure





1. Connect the wheel speed sensor jumper connector (1) to the wheel speed sensor (2).





2. Install the wheel speed sensor jumper (2) to the front strut mounting (3), routing the wheel speed sensor jumper as previously noted.
3. Route wheel speed jumper harness and grommet through the inner fender pass-through.





4. Connect the wheel speed sensor jumper electrical connector (3).
5. Install the wheel speed sensor jumper electrical connector (3) into the retaining clip (4).
6. Lower the vehicle.