Seat Belt Guide Track: Service and Repair
GUIDE REPLACEMENT - REAR SEAT SHOULDER BELTREMOVAL PROCEDURE
1. Remove the stationary rear seat back, or the seat back bolsters if equipped with a split rear folding seat back, if necessary.
IMPORTANT: Depending upon the rear seat options, and the clearance between the rear seat back and the shoulder belt guide rerouter, you may not have to remove the stationary rear seat back, or the seat back bolsters.
2. Disengage the push-pin retainer (2) from the child shoulder belt rerouter (1).
3. Remove the rerouter (1) from the lower quarter panel or from the quarter trim panel.
4. Remove the shoulder belt from the rerouter guide (3), if required.
INSTALLATION PROCEDURE
1. Install the shoulder belt to the rerouter guide (3) if required.
2. Align the rerouter (1) to the lower quarter panel or to the lower quarter trim panel.
3. Press the push-pin retainer (2) into the rerouter (1) until fully engaged.
4. Install the stationary rear seat back, or the seat back bolsters if equipped with a split rear folding seat back, if necessary.