Replacement procedure

BATTERY NEGATIVE CABLE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable (2).
2. Remove the bolt retaining the negative cable to the core support.




3. Remove the tape holding the positive cable and ground strap to the negative cable.
4. Remove the negative cable from the retainers.
5. Raise the vehicle. Refer to Vehicle Lifting.
6. Remove the lower closeout panel.
7. Remove the front transmission mount.
8. Remove the nut retaining the ground cable to the bellhousing stud.
9. Remove the ground cable.

INSTALLATION PROCEDURE
1. Install the ground cable.
2. Install the nut to retain the ground cable to the bellhousing stud.
3. Install the front transmission mount.
4. Install the lower closeout panel.
5. Lower the vehicle.
6. Install the negative cable to the retainers.




7. Tape the positive cable and ground strap to the negative cable.




8. Install the bolt to retain the ground cable to the core support.
9. Connect the negative ground cable (2).