Door Lock Cylinder: Service and Repair

Lock Cylinder Replacement - Door

Removal Procedure

Important: Do NOT attempt repairs of the door lock cylinder.

1. Remove the outside door handle.




2. Remove the door lock cylinder retaining clip in order to remover the door lock cylinder (2) from the outside door handle (1).
3. Remove the door lock cylinder gasket (4) from the outside door handle (1).

Installation Procedure




1. Install the door lock cylinder gasket (4) to the outside door handle.
2. Install the door lock cylinder (2).
3. Install the door lock cylinder retaining clip (2) to the outside door handle (1), pressing into place until fully seated.
4. Install the outside door handle.