Fan Shroud: Service and Repair
The content of this article reflects the changes identified in TSB- 05-06-02-013 Dated: December 13, 2005Fan Shroud Replacement
Caution: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade housing should always be replaced.
Removal Procedure
1. Remove the cooling fan. Refer to Radiator Cooling Fan Replacement.
2. Remove the fan nuts (9) from the fans (1, 8).
3. Remove the fans (1, 8) from the fan motors (3, 7).
4. Remove the cooling fan motor bolts (2) from the cooling fan motors (3, 7).
5. Remove the bolts (10) from the cooling fan brackets (5, 6).
6. Remove the cooling fan brackets (5, 6) from the fan shroud.
Installation Procedure
1. Install the cooling fan brackets (5, 6) to the fan shroud.
2. Install the cooling fan bracket bolts (10).
Tighten the bolts to 10 N.m (89 lb in).
3. Install the cooling fan motor bolts (2) to the cooling fan motors (3, 7).
Tighten the bolts to 6 N.m (53 lb in).
4. Install the fans (1, 8) to the fan motors (3, 7).
5. Install the fan nuts (9) to the fans (1, 8).
Tighten the nut to 6 N.m (53 lb in).
6. Install the cooling fan. Refer to Radiator Cooling Fan Replacement.