83. Exhaust Manifold Installation - Left

Exhaust Manifold Installation - Left





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the exhaust manifold studs.
Tighten the exhaust manifold studs to 18 Nm (13 ft. lbs.).
2. Install the exhaust manifold gasket.
3. Install the exhaust manifold.
4. Install the exhaust manifold nuts.
Tighten the exhaust manifold nuts working from the center outward to 16 Nm (12 ft. lbs.).
5. Install the left side spark plugs.
^ Tighten the spark plugs to 20 Nm (15 ft. lbs.) when installing spark plugs into a new cylinder head.
^ Tighten the spark plugs to 15 Nm (13 ft. lbs.) when re-installing after initial installation.





6. Install the exhaust manifold heat shield.
7. Install the exhaust manifold heat shield bolts.
Tighten the exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).