Front (Coupe)
REMOVAL PROCEDURE1. Remove the lower quarter trim panel.
2. Remove the front seat shoulder belt guide cover.
3. Remove the front seat shoulder belt guide bolt.
4. Remove the front seat shoulder belt guide.
5. Remove the front seat belt anchor bolt.
6. Remove the front seat belt retractor bolt.
7. Pull upward on the retractor in order to disengage the retractor.
8. Remove the front seat belt retractor assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt retractor assembly to the vehicle.
IMPORTANT: Remove any twists in the seat belt webbing before final assembly.
2. Insert the top of the retractor into the mounting slots and pull the retractor downward in order to install the retractor.
3. Install the front seat belt retractor bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 41 N.m (30 lb ft).
4. Install the front seat belt anchor bolt.
Tighten
Tighten the bolt to 41 N.m (30 lb ft).
5. Install the front seat shoulder belt guide to the vehicle.
6. Install the front seat shoulder belt guide bolt.
Tighten
Tighten the bolt to 41 N.m (30 lb ft).
7. Install the front seat shoulder belt guide cover. Ensure that the unit is retained.
8. Inspect the seat belt assembly for correct operation. Refer to Operational and Functional Checks.
9. Install the lower quarter trim panel.