Compartment Replacement - Floor Console - Front

Compartment Replacement - Floor Console - Front

Removal Procedure





1. Remove the floor console. Refer toConsole Replacement - Front Floor .
2. Remove the compartment mat.
3. Remove the armrest and the hinge. Refer toConsole Armrest Replacement - Front Floor .
4. Remove the accessory power receptacle from the console compartment. Refer toAccessory Power Receptacle Replacement - Floor Console in Power Outlets.
5. Reposition the wiring harness.
6. Remove the rear cover screws.




7. Remove the rear cover.




8. Remove the compartment screws.




9. Remove the side trim panel screws.
10. Remove the side trim panels.




11. Remove the compartment screws.




12. Remove the compartment.



Installation Procedure





1. Align the compartment to the upper trim plate.





Notice: Refer toFastener Notice in Cautions and Notices.

2. Install the compartment screws.

Tighten the screws to 2 Nm (18 lb in).





3. Align the side trim panels to the locators.
4. Install the side trim panel screws.

Tighten the screws to 2 Nm (18 lb in).





5. Install the compartment screws.

Tighten the screws to 2 Nm (18 lb in).





6. Align the rear cover to the floor console.




7. Install the rear cover screws.

Tighten the screws to 2 Nm (18 lb in).

8. Install the wiring harness.
9. Install the accessory power receptacle to the console compartment. Refer toAccessory Power Receptacle Replacement - Floor Console in Power Outlets.
10. Install the armrest and the hinge. Refer toConsole Armrest Replacement - Front Floor .
11. Install the compartment mat.
12. Install the floor console. Refer toConsole Replacement - Front Floor .