Bezel Replacement - Rear Door Switch

BEZEL REPLACEMENT - REAR DOOR SWITCH

REMOVAL PROCEDURE




1. Remove the rear door trim pad.
2. Remove the power window switch (1) from the bezel.




3. Remove the screws (1) from the bezel (2).
4. Remove the bezel from the trim pad.

INSTALLATION PROCEDURE




1. Position the bezel on the trim pad.
2. Install the bezel screws (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 3 N.m (27 lb in).




3. Press the window switch (1) into the bezel.
4. Install the rear door trim pad.