Seat Back Cover Replacement - Front (Fold Flat)

Seat Back Cover Replacement - Front (Fold Flat)

Removal Procedure

1. Remove the seat back panel. Refer toSeat Back Panel Replacement - Front .
2. Remove the front seat head restraint. Refer toHead Restraint Replacement - Front Seat .




3. Remove the J-hooks on the back side of the trim cover.




4. Remove the hook and loop connectors on the lower back side of the trim cover.
5. Remove the head restraint retainers. Refer toHead Restraint Retainer Replacement - Front Seat .




6. Remove the hog rings from the trim cover to the lower pad.
7. Remove the cover from the seat back by pulling the cover up and over the pad.



Installation Procedure

1. Position the seat trim cover on the seat back.
2. Install the head restraint retainers but not the head restraint. Refer toHead Restraint Retainer Replacement - Front Seat .
3. Pull the trim cover down over the pad.




4. Install the J-hooks on the back side of the trim cover.




5. Install the hook and loop connectors on the lower back side of the trim cover.




6. Install the hog rings.
7. Install the seat back panel. Refer toSeat Back Panel Replacement - Front .
8. Install the head restraint. Refer toHead Restraint Replacement - Front Seat .