Seat Back Heater Element Replacement - Front

Seat Back Heater Element Replacement - Front

Removal Procedure

1. Remove the front seat. Refer toSeat Replacement - Front Bucket .




2. Disconnect the electrical connector from the seat back cushion heater.
3. Remove the seat back cover. Refer toSeat Back Cover Replacement - Front (Fold Flat) Seat Back Cover Replacement - Front (Except Fold Flat) .
4. Gently pull on the heater element in order to remove the element from the seat back. Do NOT damage the seat back.



Installation Procedure





1. Peel off the self-stick tape from the heater element.
2. Position the heater element over the seat back. Press firmly to engage the adhesive.
3. Route and connect the electrical connector to the seat back cushion. Secure the wire with tie straps.
4. Install the seat back cover. Refer toSeat Back Cover Replacement - Front (Fold Flat) Seat Back Cover Replacement - Front (Except Fold Flat) .
5. Install the front seat. Refer toSeat Replacement - Front Bucket .