Positive Crankcase Ventilation: Service and Repair

Positive Crankcase Ventilation (PCV) Valve Replacement (L32)
Removal Procedure
1. Remove the fuel injector sight shield.





2. While holding down the PCV valve access cover (1), remove the access cover bolts.
3. Remove the PCV valve access cover (1).
4. Remove the PCV valve (2), the spring, and the O-ring (3) from the supercharger.

Installation Procedure





1. Install the new O-ring (3), the spring and the PCV valve (2).
2. Install the PCV valve access cover (1).

Notice: Refer to Fastener Notice in Service Precautions.

3. While holding down on the PCV valve access cover, install the access cover bolts.
Tighten the bolts to 10 Nm (89 lb in).
4. Install the fuel injector sight shield.