P2610
DTC P2610
DESCRIPTION
This diagnostic applies to internal microprocessor integrity conditions within the powertrain control module (PCM). This diagnostic also addresses if the PCM is not programmed.
DTC DESCRIPTORS
This diagnostic procedure supports the following DTCs:
- DTC P0601 Control Module Read Only Memory (ROM)
- DTC P0602 Control Module Not Programmed
- DTC P1621 Control Module Long Term Memory Performance
TEST DESCRIPTION
Steps 1-7:
The number below refers to the step number on the diagnostic table.
2. A DTC P0602 indicates the PCM is not programmed.