Console Replacement - Front Floor

Console Replacement - Front Floor

Removal Procedure




1. On vehicles with manual transmission, release the snaps on the shift boot.




2. Using a small flat-bladed tool, remove the front bolt cover.




3. Using a small flat-bladed tool, remove the center storage pocket, if equipped.




4. Remove the power window switch plate, if equipped.
5. Raise the armrest (1) from the front floor console.
6. Remove the bolts (6) from the front floor console.




7. Remove the front floor console by lifting up and back. Guide the shift boot over the optional shift knob and over the park brake handle.

Installation Procedure




1. Install the front floor console by guiding the shift boot over the optional shift knob and over the park brake handle.






Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts (6) to the front floor console.

Tighten the bolts to 6 N.m (53 lb in).

3. Lower the armrest (1).




4. Install the optional center storage pocket. Press into place until fully seated.
5. Install the optional power window switch plate.




6. Install the front bolt cover. Press into place until fully seated.




7. On vehicles with manual transmission, attach the snaps on the shift boot.