Glove Compartment: Service and Repair

Door Replacement - Instrument Panel (I/P) Compartment

Removal Procedure




1. Remove the screws from the instrument panel (I/P) compartment door hinge.
2. Open the I/P compartment door.
3. Lift up on the I/P compartment door stop strap. Remove the stop strap from the I/P carrier.
4. Remove the I/P compartment door from the I/P carrier.




5. Remove the screws (2) from the inner I/P reinforcement cover (4).
6. Remove the inner reinforcement cover (4) from the I/P compartment door (1).
7. Remove the I/P compartment door latch.
8. Remove the I/P compartment door lock cylinder.

Installation Procedure

1. Install the I/P compartment door lock cylinder.
2. Install the I/P compartment door latch.




3. Position the I/P compartment door (1) to the inner reinforcement cover (4).
4. Install the reinforcement cover (4) to the I/P compartment door (1).

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the I/P compartment door screws (2).

Tighten the screws to 2.3 N.m (20 lb in).

6. Position the I/P compartment door hinge to the I/P carrier.
7. Install the screws to the I/P compartment door hinge.

Tighten the screws to 2.3 N.m (20 lb in).




8. Install the I/P compartment door stop strap into the opening in the I/P carrier.
9. Close the I/P compartment door.