Horn: Service and Repair

HORN REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right front fender liner.




2. Disconnect the horn electrical connector (2).
3. Remove the horn bracket bolt (3).
4. Remove the horn (1) from the front frame rail.

INSTALLATION PROCEDURE




1. Position the horn (1) into the slot in the front frame rail.
2. Install the horn bracket bolt (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt (3) to 10 N.m (89 lb in).

3. Connect the horn electrical connector (2).
4. Install the right front fender liner.