Steering Wheel Control Switch

Steering Wheel Control Switch Assembly Replacement

Removal Procedure
1. Remove the inflatable restraint steering wheel module.





2. Remove the steering wheel controls wire harness from the retainers in the steering wheel.
3. Remove the steering wheel control switch by pushing on the back of the switch through the opening in the steering wheel.
4. Disconnect the electrical connector from the steering wheel control switch.

Installation Procedure





1. Connect the electrical connector to the steering wheel control switch.
2. Push the steering wheel controls switch into the steering wheel.
3. Install the steering wheel controls wire harness to the retainers in the steering wheel.
4. Install the inflatable restraint steering wheel module.