Wipers Inoperative - One or More Modes - Without RPO CD4

WIPERS INOPERATIVE - ONE OR MORE MODES (WITHOUT RPO CODE CD4)

TEST DESCRIPTION

Steps 1-9:

Steps 10-16:

The numbers below refer to the step numbers on the diagnostic table.
7. This step tests for continuity through the 24K ohms resistor in the windshield wiper/washer switch. The connector behind the instrument panel knee bolster is suitable for performing this step.
8. This step tests for continuity through the delay resistor in the windshield wiper/washer switch. The connector behind the instrument panel knee bolster is suitable for performing this step.