Brake Pedal Pushrod Inspection

Brake Pedal Pushrod Inspection
1. Disconnect the brake pedal pushrod (1) from the brake pedal.
2. Inspect the brake pedal pushrod eyelet bushing (2) for cracks and/or excessive wear.
3. Reposition the pedal pushrod boot (3) toward the front of the vehicle in order to expose as much of the pedal pushrod as possible.
4. Inspect the brake pedal pushrod for straightness.
5. If the brake pedal pushrod eyelet bushing exhibits cracks and/or excessive wear, then the bushing requires replacement.
6. If the brake pedal pushrod is not straight, then the brake booster requires replacement in order to replace the brake pedal pushrod.
7. Return the pedal pushrod boot to its original position on the pedal pushrod.
8. Connect the brake pedal pushrod to the brake pedal.