Cup Holder Replacement - Front Floor Console - Rear

CUP HOLDER REPLACEMENT - FRONT FLOOR CONSOLE - REAR

REMOVAL PROCEDURE
1. Remove the console armrest.
2. Open the rear cup holder.
3. Remove the console rear cup holder screws.
4. Pull out on the bottom of the cupholder to disengage the cupholder from the hooks at the top.




5. Remove the console rear cup holder.

INSTALLATION PROCEDURE




1. Engage the cupholder to the hooks at the top of the floor console and install the cupholder.
2. Install the console rear cup holder screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1 N.m (10 lb in).

3. Install the console armrest.