Sunroof Window Height and Opening Fit Adjustment (CF5)

Sunroof Window Height and Opening Fit Adjustment (CF5)

1. Open the sunshade.
2. Close the sunroof window.




3. Loosen the 3 adjusting screws on each side of the sunroof window.




4. Adjust the corners of the window panel (3) using the following guidelines:

* Adjust the front of the sunroof window (2) flush to 1 mm (0.04 in) below the top surface of the roof panel.
* Adjust the rear of the sunroof window (1) flush to 1 mm (0.04 in) above the top surface of the roof panel.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the sunroof window adjustment screws.

Tighten the screws to 4 N.m (35 lb in).

6. Inspect the sunroof for proper operation.