Front Seat Frame Assembly Replacement - Passenger

FRONT SEAT FRAME ASSEMBLY REPLACEMENT - PASSENGER

REMOVAL PROCEDURE
1. If replacing the front passenger seat cushion, you must also replace the inflatable restraint passenger presence system.

CAUTION:
- Refer to SIR Caution.
- Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.

2. Remove the front seat from the vehicle.
3. Remove the seat cushion cover and pad.
4. Remove the seat back cover and pad.




5. Remove the back suspension.
6. Remove the cushion suspension.

INSTALLATION PROCEDURE




1. Install the cushion suspension.
2. Install the back suspension.
3. Install the seat back cover and pad.
4. Install the seat cushion cover and pad.
5. Install the front seat to the vehicle.
6. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup.

CAUTION: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim. Failure to do so may cause the system to malfunction.