Transmission Mount Replacement - Rear

Transmission Mount Replacement - Rear

Removal Procedure

1. Raise and support the vehicle.
2. Remove the left tire and wheel.
3. Use a suitable transaxle support stand to support the rear of the powertrain.





4. Remove the transmission mount through bolt (1).





5. Remove the transmission mount to transmission bolts (1).
6. Remove the transmission mount (2) from the vehicle.

Installation Procedure





1. Install the transmission mount (2) to the vehicle.

2. Notice: Refer to Fastener Notice in Service Precautions.
Install the transmission mount to transmission bolts (1).

Tighten the bolts to 50 Nm (37 lb ft).





3. Install the transmission mount through bolt (1).

Tighten the bolt to 90 Nm (66 lb ft).
4. Remove the transaxle support stand.
5. Install the left tire and wheel.
6. Lower the vehicle.