Trim Panel Replacement - Instrument Panel (I/P) Center

Trim Panel Replacement - Instrument Panel (I/P) Center

Removal Procedure

1. Remove the instrument panel (I/P) compartment.
2. Remove the knee bolster.
3. Set the parking brake.
4. Shift the vehicle into neutral, if equipped with automatic transmission.






Important: The I/P center trim bezel is painted and can be damaged. Pull on the bottom of the bezel to disengage the lower clips first or damage to the HVAC control module could occur.

5. Remove the I/P center trim bezel.
6. Remove the hazard switch.

Installation Procedure

1. Install the hazard switch.




2. Install the I/P center trim bezel.
3. Install the knee bolster.
4. Install the I/P compartment.
5. Shift into park.
6. Release parking brake.