Procedures

COMPARTMENT REPLACEMENT - INSTRUMENT PANEL (I/P)

REMOVAL PROCEDURE




1. Open the instrument panel (I/P) compartment door.
2. Remove the I/P right outer trim cover.
3. Remove the right closeout panel.
4. Remove the I/P compartment assembly screws.
5. Remove the I/P compartment assembly.

INSTALLATION PROCEDURE




1. Install the I/P compartment assembly.
2. Tighten the I/P compartment assembly screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2.5 N.m (22 lb in).

3. Close the I/P compartment door.
4. Install the right closeout panel.
5. Install the I/P right outer trim cover.