Garnish Molding Replacement - Windshield Pillar (Sedan)

GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR (SEDAN)

REMOVAL PROCEDURE
1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8.
2. Partially remove the front door weatherstrip.




3. Remove the cover from the garnish trim fasteners.




4. Remove the garnish trim fasteners.




5. Starting at the top, remove the windshield garnish trim by pulling straight out.

INSTALLATION PROCEDURE




1. Starting at the bottom, install the windshield garnish trim.




2. Install the garnish trim fastener.

NOTE: Refer to Fastener Notice.

Tighten the fastener to 3 N.m (26 lb in).




3. Install the cover to the garnish trim fastener.
4. Install the front door weatherstrip.
5. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8.