Sunroof Window Height and Opening Fit Adjustment (C3Y)

Sunroof Window Height and Opening Fit Adjustment (C3Y)

1. Open the sunshade.
2. If adjusting the front sunroof window, refer to Sunroof Window Replacement - Front.
3. If adjusting the 2nd or 3rd sunroof window, refer to Sunroof Window Replacement - 2-3.
4. If adjusting the rear sunroof window, refer to Sunroof Window Replacement - Rear.
5. Loosen the adjusting screws on each side of the sunroof window.




6. Adjust the sunroof window using the following guidelines:

* Adjust the front sunroof window 90 mm (3.5 in) on each side (a) flush to roof panel.
* Adjust the 2nd sunroof window flush to 1 mm (0.04 in) below the top surface (b) of the front sunroof window.
Roof panel to window (a) 90 mm (3.5 in) on each side.
* Adjust the 3rd sunroof window flush to 1 mm (0.04 in) below the top surface (c) of the 2nd sunroof window.
Roof panel to window (a) 90 mm (3.5 in) on each side.
* Adjust the rear sunroof window flush to 1 mm (0.04 in) below the top surface of the 3rd sunroof window.
Roof panel to window (a) 90 mm (3.5 in) on each side.

Notice: Refer to Fastener Notice in Service Precautions.

7. Tighten the sunroof window adjustment screws.

Tighten the screws to 4 N.m (35 lb in).

8. Install the rear sunroof window.
9. Install the 2nd or 3rd sunroof window.
10. Install the front sunroof window.
11. Inspect the operation of the sunroof window.
12. Close the sunshade.