Sunroof Window Seal Replacement (With RPO Code CF5)

SUNROOF WINDOW SEAL REPLACEMENT (WITH RPO CODE CF5)

REMOVAL PROCEDURE
1. Remove the sunroof window panel.




2. Remove the seal from the window panel frame by pulling the seal away at one point and continuing around the perimeter of the frame.
3. Wipe the perimeter of the frame area with a clean, dampened cloth using window cleaner GM P/N 1050427 (Canadian P/N 992727) or equivalent in order to clean the surface of the perimeter. Allow to air dry.

INSTALLATION PROCEDURE
1. Using a clean dampened cloth wipe the seal with a small amount of the same window cleaner in order to ease installation.




2. Position the sunroof window panel seal onto the window frame, locating the starting end of the seal at the relief notch in the center of the passenger side of the frame.
3. Firmly press the window seal into place. A small rubber hammer will help in the installation.

IMPORTANT: Ensure that the seal is properly seated around the entire perimeter of the window frame.

4. Install the sunroof window panel.
5. Adjust the window panel height. Refer to Sunroof Window Height and Opening Fit Adjustment (C3Y) Sunroof Window Height and Opening Fit Adjustment (CF5).
6. Inspect sunroof for proper operation.