Sunroof Switch Replacement (With RPO Code C3Y)

SUNROOF SWITCH REPLACEMENT (WITH RPO CODE C3Y)

REMOVAL PROCEDURE




1. Remove the overhead console cover.
2. Disconnect the electrical connector from the sunroof switch (2).
3. Remove the screws from the sunroof switch.

INSTALLATION PROCEDURE




1. Install the screws to the sunroof control switch.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

2. Connect the electrical connector to the sunroof control switch (2).
3. Install the overhead console cover.