Seat Adjuster Motor Replacement - Horizontal

SEAT ADJUSTER MOTOR REPLACEMENT - HORIZONTAL

REMOVAL PROCEDURE
1. Remove the front seat.

CAUTION: Refer to SIR Caution.




2. Remove the seat adjuster motor cables by pulling the cables out of the adjuster.




3. Disconnect the electrical connectors.




4. Remove the fasteners from the seat adjuster motor.
5. Remove the seat adjuster motor.

INSTALLATION PROCEDURE




1. Install the seat adjuster motor.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fastener to 3 N.m (26.5 lb in).




2. Connect the electrical connectors.




3. Install the seat adjuster motor cables by pushing the cables into the adjuster.
4. Install the front seat.
5. Verify that both tracks operate correctly.