Coolant Heater Replacement

Coolant Heater Replacement (3.5L and 3.9L)
Removal Procedure





1. Drain the cooling system. Refer to Draining and Filling Cooling System.
2. Disconnect the engine coolant heater cord from the engine coolant heater.





3. Remove the engine coolant heater.
4. Clean the engine coolant heater opening.

Installation Procedure





1. Apply sealer GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the threads of the engine coolant heater, if necessary.

Notice: Refer to Fastener Notice.

2. Install the engine coolant heater.
Tighten the coolant heater to 60 Nm (44 ft. lbs.).





3. Connect the engine coolant heater cord to the engine coolant heater.
4. Lower the vehicle.
5. Fill the cooling system. Refer to Draining and Filling Cooling System.
6. Inspect for leaks.