13. Valve Rocker Arm Cover Removal - Left Side

Valve Rocker Arm Cover Removal - Left





1. Remove the positive crankcase ventilation (PCV) tube bolt and clip.
2. Remove the PCV tube.





3. Notice: Valve rocker arm cover gasket and sealant must be carefully trimmed away from lower intake manifold gasket. Failure to do so will damage the lower intake manifold gasket, causing a severe oil leak.

Remove the valve rocker arm cover bolts.

4. Important: When removing the valve rocker arm cover make sure the gasket stays in place attached to the cylinder head.

Remove the valve rocker arm cover.





5. Trim valve cover gasket and sealant away from lower intake manifold gasket at the cylinder head to lower intake manifold joints (1).
6. Remove the valve rocker arm cover gasket.