14. Valve Rocker Arm Cover Removal - Right Side

Valve Rocker Arm Cover Removal - Right
Tools Required
^ J37088-A Fuel Line Disconnect Tool Set





1. Remove the fuel feed pipe bolts.
2. Remove the fuel feed pipe secondary latch.
3. Using J37088-A remove the fuel feed pipe.





4. Remove any remaining spark plug wires from their retainers.
5. Remove the ignition coil assembly bolts and nuts.
6. Remove the ignition coil assembly.
7. Remove the ignition coil assembly studs, if necessary.





8. Remove the positive crankcase ventilation tube from the valve rocker arm cover.





9. Remove the valve rocker arm cover bolts.

10. Important: When removing the valve rocker arm cover make sure the gasket stays in place attached to the cylinder head.

Remove the valve rocker arm cover.
11. Cut the RTV in the channel where the intake, cylinder head and valve rocker arm cover meet with a suitable tool.
12. Remove the valve rocker arm cover gasket.