Bracket Replacement - Instrument Panel (I/P) Center Support

BRACKET REPLACEMENT - INSTRUMENT PANEL (I/P) CENTER SUPPORT

REMOVAL PROCEDURE




1. Remove the body control module.
2. Remove the center console.
3. Remove the instrument panel (I/P) center support bracket bolts.
4. Remove the I/P center support bracket.

INSTALLATION PROCEDURE




1. Install the I/P center support bracket.
2. Install the I/P center support bracket bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the body control module.
4. Install the center console.