Multifunction Turn Signal Switch Housing Replacement

Multifunction Turn Signal Switch Housing Replacement

Removal Procedure





1. Disable the supplemental inflatable restraint (SIR) system.
2. Remove the SIR coil (3).
3. Disconnect the electrical connectors from the multifunction switches.
4. Remove the multifunction switch housing (2) from the steering column (1).

Installation Procedure





1. Install the multifunction switch housing (2) to the steering column (1).
2. Connect the electrical connectors to the multifunction switches.
3. Install the SIR coil (3).
4. Enable the SIR system.